Celtra® Press
Celtra® Press is a monolithic lithium silicate press ceramic specially developed for the production of indirect ceramic restoration. Celtra provides amazing esthetic properties that closely mimic a patients natural teeth making an ideal restoration for anterior indications. Celtra® Press is the newest generation of glass ceramic. With more strength than IPS e.max® and comparable, lifelike esthetics, this unique material ensures patient satisfaction. It offers a combination of fail-proof translucency and expert fabrication from the Blackburn fixed department.
- Chameleon Effect with In-vivo Blending
- Natural Opalescence
- Flexural Strength of More than 500 MPa
- Matches All 16 VITA® Classical Shades
Celtra Press is a lithium silicate, glass-ceramic restoration. Indicated for single unit crowns, 3 unit anterior bridges, inlay/onlay and veneers.
Bridges which include molars, Maryland style bridges, and bridges which have a short vertical height that does not allow for adequate connector height.
Anterior full-coverage crowns require a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Facial reduction is 1.5 – 2 mm; 1 – 1.5 mm lingual contact clearance. Incisal reduction is 1.5 – 2 mm with rounded internal line angles, and an incisal edge at least 1mm wide to permit optimum milling of the incisal edge during CAD/CAM processing. Posterior full-coverage crown requires a chamfer or shoulder margin. A circular shoulder is prepared with rounded inner edges or a chamfer at an angle of 10-30°: the width of the shoulder/chamfer is approx. 1 mm. Occlusal reduction is 1.5 – 2 mm: axial reduction (buccal, lingual, and interproximal) is 1.5 mm with rounded internal line angles.
Celtra press can be cemented using a resin reinforced glass ionimer such as RelyX Luting cement. Or bonded using a resin cement when extra strength is needed due to lack of retention on the prep, use a resin cement such as RelyX Unicem or RelyX Ultimate.
If adjustments are needed, use fine diamonds with water and light pressure. Always remove the crown when adjusting or bond/cement crown before adjustments are made.).
- D2740 Crown – Porcelain/Ceramic Substrate
- D6245 Pontic Porcelain/Ceramic
- D6740 Abutment Crown Porcelain/Ceramic